مشتریان گرامی ، با عرض پوزش به دلیل سال نو کشور چین، سفارشات تامین خارج از تاریخ 6 تا 21 بهمن ماه قابل پیگیری نخواهد بود.

فروش، طراحی، ساخت، تولید و مونتاژ قطعات الکترونیکیورود به پنل

D0S1102

اسیلوسکوپ

اسیلوسکوپ مدل DOS1102

Oscilloscope/Analyzer

مشخصات

پارت نامبرD0S1102
سازندهنامشخص

قیمت براساس تعداد:

نیاز به استعلام

توضیحات

Description

Characteristic			Description
Model			DOS1102
Bandwidth			110 MHz
Channel			2 channels
Sampling	Sampling method		Normal sampling, peak detection, average
	Highest real-time sampling rate		1 GS/s
Enter	Input coupling		DC, AC, ground
	Input resistance		1 MΩ±2%, in parallel with 20 pF±5 pF
	Probe attenuation coefficient		1X，10X，100X，1000X
	Maximum input voltage		400 V (DC + AC peak)
	Isolation between channels		50 Hz: 100 : 1
			10 MHz: 40 : 1
	Time delay between channels (typical)		150 ps
	Bandwidth limit		20 MHz，Full bandwidth
Level	Sampling rate range		0.5 S/s～1 GS/s
	Waveform interpolation		(sinx)/x
	Maximum storage depth		10K
	Sweep speed range (S/div)		2 ns/div～1000 s/div
			Step by 1～2～5 system
	Time base accuracy		±100 ppm
	Time interval (△T) measurement accuracy (DC～100MHz)		single：
			±(1 sampling interval time + 100 ppm × reading + 0.6 ns)
			>16 averages:
			±(1 sampling interval time + 100 ppm × reading + 0.4 ns)
Vertical	Analog to digital converter (A/D)		8-bit resolution, simultaneous sampling of two channels.
	Sensitivity (Volt/div) range		5 mV/div～5 V/div
	Displacement range		±2 V (5 mV/div – 100 mV/div)
			±50 V (200 mV/div – 5 V/div)
	Analog bandwidth		100 MHz
	Single bandwidth		Full Bandwidth
	Low frequency response (AC coupling, -3dB)		≥10Hz (On BNC)
	Rise time (typical on BNC)		≤ 3.18 ns
	DC gain accuracy		±3%
	DC measurement accuracy (average value)		The voltage difference (△V) between any two points on the waveform after averaging the captured ≥16 waveforms:
	Sampling method)		±(3% of reading + 0.05 division).
	Turn on/off waveform inversion
Measuring	Cursor measurement		Voltage difference between cursors (△V), time difference between cursors (△T)
	Automatic measurement		Period, frequency, average value, peak-to-peak value, root mean square value, maximum value, minimum value, top value, bottom value, amplitude, overshoot, preshoot, rise time, fall time, positive pulse width, negative pulse width, Positive duty cycle, negative duty cycle, delay A->B
			delay A->B
			、Cycle RMS, cursor RMS, duty cycle, phase
	Computation		Add, subtract, multiply, divide, FFT
	Store waveform		16 groups of waveforms
	Li Shayu Graphics	bandwidth	Full Bandwidth
		phase difference	±3 degrees
Communication Interface	USB 2.0, support U disk storage
Frequency meter	stand by